HELLA

EuroLED® Rear Direction Indicator Lamp

From the team that designed the iconic DuraLED® comes the stylish EuroLED® with a contemporary interpretation of the classical round shape combining HELLA’s superior material choices with sophisticated design. For applications where the traditional circular shape is preferred. A single high intensity LED and precision optics ensure super low power sonsumption.

EuroLED® rear direction indicator lamp with amber lens.

Ideal for commercial vehicles

Tough under pressure
Completely sealed, maintenance free. Designed to withstand high pressure washing and temporary submersion.

Reliable – durable – ultra long service life
Superior materials feature UV, corrosion, impact and shock resistance ensuring an ultra long service life.

Hella Compatibility Solution HCS
Hella P/N 2133-CS features HCS Technology, patented indicator failure control technology which allows seamless communication with HELLA HCS control flasher units, or modern European trucks with body controllers compliant with the ISO 13207-1 standard. Please click on HCS above for further information.

To find a HELLA reseller near you, click here..

Rollover/tap the icons below for further details:

Fit and Forget by Design means every aspect, material and component of this lamp has been carefully chosen to ensure longevity in the most demanding environmental conditions.

Fit and Forget

Fit and Forget by Design means every aspect, material and component of this lamp has been carefully chosen to ensure longevity in the most demanding environmental conditions.

LED Technology

Product is compliant to all relevant Australian Design Rules to allow use on Australian and New Zealand roads.

ADR (Australian Design Rules) Compliance

Product is compliant to all relevant Australian Design Rules to allow use on Australian and New Zealand roads.

Multivolt™ for optimum performance in 12 and 24 volt systems.

Multivolt™

Multivolt™ for optimum performance in 12 and 24 volt systems.

Available with HCS. For information please refer to HELLA Compatibility Solutions under the Technology / Marker and Signal Lamps section.

HELLA Compatibility Solution (HCS)

Available with HCS. For information please refer to HELLA Compatibility Solutions under the Technology / Marker and Signal Lamps section.

These lamps far exceed the minimum legal brightness requirement, and are much more noticeable to following drivers particularly as the vehicle in front turns and the stop or turn signal is viewed from an angle.

Ultra Wide Visibility Optics

These lamps far exceed the minimum legal brightness requirement, and are much more noticeable to following drivers particularly as the vehicle in front turns and the stop or turn signal is viewed from an angle.

HELLA New Zealand LED lamps are designed to withstand harsh environmental conditions and will tolerate long term exposure to high UV levels without fading or embrittlement.

UV Resistant

HELLA New Zealand LED lamps are designed to withstand harsh environmental conditions and will tolerate long term exposure to high UV levels without fading or embrittlement.

This LED based lighting product carries a 5-year warranty covering faults in materials, components or workmanship. Please refer to HELLA’s full terms and conditions.

5 Year Warranty

This LED based lighting product carries a 5-year warranty covering faults in materials, components or workmanship. Please refer to HELLA’s full terms and conditions.

Made in New Zealand

Options

EuroLED<sup>®</sup> Rear Direction Indicator Lamp

EuroLED® Rear Direction Indicator Lamp

2133
EuroLED<sup>®</sup> Rear Direction Indicator Lamp - Blister Pack

EuroLED® Rear Direction Indicator Lamp - Blister Pack

2133-BL
EuroLED<sup>®</sup> Rear Direction Indicator Lamp - Bulk Pack 12

EuroLED® Rear Direction Indicator Lamp - Bulk Pack 12

2133-BULK
EuroLED<sup>®</sup> Rear Direction Indicator Lamp - HCS Technology

EuroLED® Rear Direction Indicator Lamp - HCS Technology

2133-CS

Specifications

Mounting

Two hole surface mount with mounting bushes supplied.

Voltage

Multivolt for optimum brightness at input voltages from 9 to 33 volts.

Power Consumption

2.5W

Protection

Reverse polarity and 1500 watt Transient Voltage Suppressor (TVS).
IP 6K6    (Protection against dust and high pressure water jets)
IP 6K7    (Protection against dust and temporary water immersion)

Cable Length

Pre-wired with 2.5m of sheathed multi-core cable.

Compliance

ADR 6/00: Cat 2a E4 10208 ECE R6/01 ISO 13207-1 (2133-CS only)

Outline

All dimensions in mm.
All dimensions in mm.

Documents

Document File Name File Size
  2133 Instruction Sheet.pdf 401.17 KB
  2133-CS Instruction Sheet.pdf 444.95 KB

Top