HELLA

EuroLED® Stop/Tail/Rear Turn Signal Lamp - SAE

Low profile LED stop/tail/turn signal lamps with single LED. The use of precision optics enable a single high intensity LED to be used for the first time in a commercial vehicle lamp, resulting in low power consumption.

To view product designed for the New Zealand market, please click here

 

Rollover/tap the icons below for further details:

Fit and Forget by Design means every aspect, material and component of this lamp has been carefully chosen to ensure longevity in the most demanding environmental conditions.

Fit and Forget

Fit and Forget by Design means every aspect, material and component of this lamp has been carefully chosen to ensure longevity in the most demanding environmental conditions.

Product is compliant to all relevant SAE Standards to allow use on New Zealand roads.

SAE

Product is compliant to all relevant SAE Standards to allow use on New Zealand roads.

Multivolt™ for optimum performance in 12 and 24 volt systems.

Multivolt™

Multivolt™ for optimum performance in 12 and 24 volt systems.

This specially formulated high impact acrylic (PMMA) offers enhanced resistance against long term UV-exposure and commonly used chemical washes, liquids, etc.

High Impact Acrylic Lens Material

This specially formulated high impact acrylic (PMMA) offers enhanced resistance against long term UV-exposure and commonly used chemical washes, liquids, etc.

These lamps far exceed the minimum legal brightness requirement, and are much more noticeable to following drivers particularly as the vehicle in front turns and the stop or turn signal is viewed from an angle.

Ultra Wide Visibility Optics

These lamps far exceed the minimum legal brightness requirement, and are much more noticeable to following drivers particularly as the vehicle in front turns and the stop or turn signal is viewed from an angle.

HELLA New Zealand LED lamps are designed to withstand harsh environmental conditions and will tolerate long term exposure to high UV levels without fading or embrittlement.

UV Resistant

HELLA New Zealand LED lamps are designed to withstand harsh environmental conditions and will tolerate long term exposure to high UV levels without fading or embrittlement.

This LED based lighting product carries a 5-year warranty covering faults in materials, components or workmanship. Please refer to HELLA’s full terms and conditions.

5 Year Warranty

This LED based lighting product carries a 5-year warranty covering faults in materials, components or workmanship. Please refer to HELLA’s full terms and conditions.

Made in New Zealand

Options

EuroLED<sup>®</sup> Stop/Tail/Rear Turn Signal Lamp - Black Cover

EuroLED® Stop/Tail/Rear Turn Signal Lamp - Black Cover

2SB 959 821-301
EuroLED<sup>®</sup> Stop/Tail/Rear Turn Signal Lamp - White Cover

EuroLED® Stop/Tail/Rear Turn Signal Lamp - White Cover

2SB 959 821-311

Specifications

Mounting

Two hole surface mount with mounting bushes supplied.

Voltage

Multivolt for optimum brightness at input voltages from 9 to 33 volts.

Power Consumption

Stop/Rear turn: 2.5W
Tail: 0.5W

Protection

Reverse polarity and 1500 watt Transient Voltage Suppressor (TVS)
IP 6K6 (Protection against dust and high pressure water jets)
IP 6K7 (Protection against dust and temporary water immersion)

Cable Length

Pre-wired with 2.5m of sheathed multi-core cable.

Lens Material

PMMA

Approval Markings

SAE S2 T2 I6 05 DOT

Options

For product designed for the New Zealand market, please click here

Outline

All dimensions in mm.
All dimensions in mm.

Top