DuraLED® Combi Stop/Rear Position/Rear Direction Indicator Lamp - ECE
DuraLED® combination lamp, featuring Ultra Wide Visibility Optics and Enhanced Definition Technology (EDT). Suitable for light commercial and boat trailers. Shockproof and fully sealed to withstand water submersion and high-pressure washing. Optic appears clear until illuminated.
To view product designed for the New Zealand market, please click here
Rollover/tap the icons below for further details:
Fit and Forget
Fit and Forget by Design means every aspect, material and component of this lamp has been carefully chosen to ensure longevity in the most demanding environmental conditions.
ECE Certified
Product has been type approved to all relevant UN ECE Regulations to allow use on Australian and New Zealand roads.
Multivolt™
Multivolt™ for optimum performance in 12 and 24 volt systems.
Enhanced Definition Technology
A stop signal that increases in brightness and illuminated area enhances the recognition of the lamp as a warning signal.
High Impact Acrylic Lens Material
This specially formulated high impact acrylic (PMMA) offers enhanced resistance against long term UV-exposure and commonly used chemical washes, liquids, etc.
Ultra Wide Visibility Optics
These lamps far exceed the minimum legal brightness requirement, and are much more noticeable to following drivers particularly as the vehicle in front turns and the stop or turn signal is viewed from an angle.
GGVSEB/ADR Regulation
GGVSEB (previously GGVS) stands for the German regulation on carriage of dangerous goods by road, rail and inland waterway.
UV Resistant
HELLA New Zealand LED lamps are designed to withstand harsh environmental conditions and will tolerate long term exposure to high UV levels without fading or embrittlement.
5 Year Warranty
This LED based lighting product carries a 5-year warranty covering faults in materials, components or workmanship. Please refer to HELLA’s full terms and conditions.
Made in New Zealand
Specifications
Mounting |
Two hole surface mount with mounting bushes supplied. |
||||||
Voltage |
Multivolt™ for optimum brightness at input voltages from 8 to 28 volts. |
||||||
Power Consumption |
|
||||||
Protection |
|
||||||
Cable Length |
Pre-wired with 6m of sheathed multi-core cable. |
||||||
Lens Material |
PMMA |
||||||
Approval Markings |
|
Outline
Documents
Document | File Name | File Size |
---|---|---|
2SD 959 050-xx Instruction Sheet.pdf | 384.64 KB |