HELLA

110mm Round LED Rear Direction Indicator Lamp - ECE

Low profile LED rear direction indicator lamp (category 2a) specifically designed for commercial transport applications. Features high-intensity LEDs and high impact acrylic lens for superior light output and impact resistance.

Hella Compatibility Solution HCS
Features HCS Technology. Please click on HCS above for further information. 

To view product designed for the New Zealand market, please click here

 

 

Rollover/tap the icons below for further details:

Fit and Forget by Design means every aspect, material and component of this lamp has been carefully chosen to ensure longevity in the most demanding environmental conditions.

Fit and Forget

Fit and Forget by Design means every aspect, material and component of this lamp has been carefully chosen to ensure longevity in the most demanding environmental conditions.

Product has been type approved to all relevant UN ECE Regulations to allow use on Australian and New Zealand roads.

ECE Certified

Product has been type approved to all relevant UN ECE Regulations to allow use on Australian and New Zealand roads.

Multivolt™ for optimum performance in 12 and 24 volt systems.

Multivolt™

Multivolt™ for optimum performance in 12 and 24 volt systems.

Available with HCS. For information please refer to HELLA Compatibility Solutions under the Technology / Marker and Signal Lamps section.

HELLA Compatibility Solution (HCS)

Available with HCS. For information please refer to HELLA Compatibility Solutions under the Technology / Marker and Signal Lamps section.

This specially formulated high impact acrylic (PMMA) offers enhanced resistance against long term UV-exposure and commonly used chemical washes, liquids, etc.

High Impact Acrylic Lens Material

This specially formulated high impact acrylic (PMMA) offers enhanced resistance against long term UV-exposure and commonly used chemical washes, liquids, etc.

GGVSEB (previously GGVS) stands for the German regulation on carriage of dangerous goods by road, rail and inland waterway.

GGVSEB/ADR Regulation

GGVSEB (previously GGVS) stands for the German regulation on carriage of dangerous goods by road, rail and inland waterway.

HELLA New Zealand LED lamps are designed to withstand harsh environmental conditions and will tolerate long term exposure to high UV levels without fading or embrittlement.

UV Resistant

HELLA New Zealand LED lamps are designed to withstand harsh environmental conditions and will tolerate long term exposure to high UV levels without fading or embrittlement.

This LED based lighting product carries a 5-year warranty covering faults in materials, components or workmanship. Please refer to HELLA’s full terms and conditions.

5 Year Warranty

This LED based lighting product carries a 5-year warranty covering faults in materials, components or workmanship. Please refer to HELLA’s full terms and conditions.

Made in New Zealand

Options

110mm Round LED Rear Direction Indicator Lamp - Clear Lens - Chrome Base - ECE

110mm Round LED Rear Direction Indicator Lamp - Clear Lens - Chrome Base - ECE

2BA 959 932-581
110mm Round LED Rear Direction Indicator Lamp - Clear Lens - Black Base - ECE

110mm Round LED Rear Direction Indicator Lamp - Clear Lens - Black Base - ECE

2BA 959 932-571
110mm Round LED Rear Direction Indicator Lamp - Clear Lens - Module - ECE

110mm Round LED Rear Direction Indicator Lamp - Clear Lens - Module - ECE

2BA 959 932-551
110mm Round LED Rear Direction Indicator Lamp - Amber Lens - Chrome Base - ECE

110mm Round LED Rear Direction Indicator Lamp - Amber Lens - Chrome Base - ECE

2BA 959 932-541
110mm Round LED Rear Direction Indicator Lamp - Amber Lens - Black Base - ECE

110mm Round LED Rear Direction Indicator Lamp - Amber Lens - Black Base - ECE

2BA 959 932-531
110mm Round LED Rear Direction Indicator Lamp - Amber Lens - Module - ECE

110mm Round LED Rear Direction Indicator Lamp - Amber Lens - Module - ECE

2BA 959 932-511

Specifications

Mounting

Mounting only with lens engraving “TOP” located correctly.

Voltage

Multivolt™ for optimum brightness at input voltages from 9 to 33 volts.

Power Consumption

3W

Protection

Reverse polarity and 5000 watt Transient Voltage Suppressor (TVS)
IP 6K6 (Protection against dust and high pressure water jets)
IP 6K7 (Protection against dust and temporary water immersion)

Cable Length

Pre-wired with 200mm of cable.

Lens Material

PMMA

Approval Markings

E24 0023 E4 10R 04-2915  ISO 13207-1

Note

Lamp compatible with 12V DC and 24V DC HCS units. Pendant mount is also available.

Outline

Chrome base - All dimensions in mm.
Chrome base - All dimensions in mm.
Black base - All dimensions in mm.
Black base - All dimensions in mm.
Module - All dimensions in mm.
Module - All dimensions in mm.

Top