HELLA

DuraLED® Combi Stop/Rear Position/Rear Direction Indicator Lamp

DuraLED®  combination lamp, suitable for light commercial and boat trailers. Shockproof and fully sealed to withstand water submersion and high-pressure washing. Optic appears clear until illuminated.


For our latest version view HELLA P/N 2378, featuring the same LED configuration as P/N 2379 plus a slimline housing, Grilamid® lens for high impact protection and RFCommSafe™ for superior electromagnetic compatibility (EMC).


Hella P/N 2379-CS features HCS Technology, patented indicator failure control technology which allows seamless communication with HELLA HCS control flasher units, or modern European trucks with body controllers compliant with the ISO 13207-1 standard. Please click on HCS above for further information.

To find a HELLA reseller near you, click here.

    DuraLED® Lifetime Warranty
All HELLA DuraLED® products carry a Lifetime Warranty.
Note: Lifetime means the economic life of the vehicle these products were first installed on. 
 
 

 

Rollover/tap the icons below for further details:

Fit and Forget by Design means every aspect, material and component of this lamp has been carefully chosen to ensure longevity in the most demanding environmental conditions.

Fit and Forget

Fit and Forget by Design means every aspect, material and component of this lamp has been carefully chosen to ensure longevity in the most demanding environmental conditions.

LED Technology

Product is compliant to all relevant Australian Design Rules to allow use on Australian and New Zealand roads.

ADR (Australian Design Rules) Compliance

Product is compliant to all relevant Australian Design Rules to allow use on Australian and New Zealand roads.

Multivolt™ for optimum performance in 12 and 24 volt systems.

Multivolt™

Multivolt™ for optimum performance in 12 and 24 volt systems.

Available with HCS. For information please refer to HELLA Compatibility Solutions under the Technology / Marker and Signal Lamps section.

HELLA Compatibility Solution (HCS)

Available with HCS. For information please refer to HELLA Compatibility Solutions under the Technology / Marker and Signal Lamps section.

A stop signal that increases in brightness and illuminated area enhances the recognition of the lamp as a warning signal.

Enhanced Definition Technology

A stop signal that increases in brightness and illuminated area enhances the recognition of the lamp as a warning signal.

These lamps far exceed the minimum legal brightness requirement, and are much more noticeable to following drivers particularly as the vehicle in front turns and the stop or turn signal is viewed from an angle.

Ultra Wide Visibility Optics

These lamps far exceed the minimum legal brightness requirement, and are much more noticeable to following drivers particularly as the vehicle in front turns and the stop or turn signal is viewed from an angle.

HELLA New Zealand LED lamps are designed to withstand harsh environmental conditions and will tolerate long term exposure to high UV levels without fading or embrittlement.

UV Resistant

HELLA New Zealand LED lamps are designed to withstand harsh environmental conditions and will tolerate long term exposure to high UV levels without fading or embrittlement.

Made in New Zealand

Options

DuraLED<sup>®</sup> Combi

DuraLED® Combi

2379
DuraLED<sup>®</sup> Combi - HCS Technology

DuraLED® Combi - HCS Technology

2379-CS

Specifications

Optics

Optic appears clear until illuminated

Mounting

Two hole surface mount with mounting bushes supplied.
Suitable for horizontal mounting.

Voltage

Multivolt for optimum brightness at input voltages from 8 to 28 volts.

Power Consumption

  P/N 2379 P/N 2379-CS
Stop: 6W 5W
Rear position: 1W 1.5W
Rear direction indicator: 5W 3W

Protection

Reverse polarity and 5000 watt Transient Voltage Suppressor (TVS)
IP 6K6     (Protection against dust and high pressure water jets)
IP 6K7     (Protection against dust and temporary water immersion)

Cable Length

Pre-wired with 6m of sheathed multi-core cable.

Compliance

ADR 6/00: Cat 2a ADR 49/00 E4 10176 ECE R6/01
ECE R7/02 ISO 13207-1 (2379-CS only)

Outline

All dimensions in mm.
All dimensions in mm.

Documents

Document File Name File Size
  2379 - Instruction Sheet.pdf 343.85 KB
  2379-CS 2379-GMD - Instruction Sheet.pdf 356.42 KB

Top